日本展柜出货啦！

耗时一个月，终于都顺利做完了。

这一批展柜是发到日本的，之前有人来厂里看过，他说很简单，其实其中有非常非常多的讲究。

首先我们展柜这个 logo，它是日语的。这个logo呢我当时想的是用来贴，因为它logo非常小，日语笔画非常多。做亚克力字就做不了，笔画太细了，于是提议出来说用背胶来贴，但是突然一想，背胶也有个问题，这个天气热了，它比较容易起胶，会掉。

最终讨论了一个方法——丝印。

另外还有两个大字，大字我是准备用来做那个立体字的，立体和平面相互辉映就比较有感觉，不能全部都做平面字，这个一个是logo方面的。

还有电线方面、包括变压器方面都是有日本的FES认证的，至少成本要高出3倍。其实这些都还是比较花心思的。

其实客户他倒是没有说一定要说日本认证的，但是我们这个为了以防万一，万一海关或者商场的检验人员，他说你没有认证怎么怎么滴，不让你进场就比较麻烦。所以我还是给他做了认证，当然成本是增加了不少，包括柜台底部下面的这个连接器，它可以任意三面走线。

插座用的是日本的那种二插头的，就是适用于日本的插座，包括柜内油漆都是给他做了处理，像我们这样把内部处理的和外部一样光亮的细节是很少的。

灯条和角度还有色温都是经过多方测试，之前做了一个样板，在样板的基础上，也是改了非常多次吧，一些角度的问题、字体的问题，都改了挺多的，还是非常用心的在做这个展柜。

果然客户很满意，最后验货在视频里看了一遍，就汇了尾款，派了一个同事来看一眼就出货了。

其实找我们的客户都很爽快，不墨迹，主要还是他们是有钱人，展柜是小项目，每次只要我们品质OK，过关，付款那是分分钟的事。我应该感激，我们全厂齐心协力把品质提升了，感恩客户选择相信我章娅妮。

做了不称心的展柜，应该来鑫峰厂试试。

The Japanese display cases have shipped!

After a month of hard work, everything was completed successfully.

This batch of display cases was destined for Japan, and although some might have considered them simple, they involved numerous intricate details.

Firstly, the logo on our display cases is in Japanese. Initially, I thought about using stickers due to the logo’s small size and the complexity of the Japanese characters. Acrylic letters wouldn't work because the strokes were too fine. Then, I suggested using adhesive decals, but I realized that they could peel off in hot weather.

After much discussion, we decided on screen printing.

Additionally, there were two larger characters that I planned to make into three-dimensional letters. The combination of flat and dimensional text creates a visually appealing effect. It’s important not to use only flat lettering for the logo.

In terms of electrical components, including transformers, we ensured they met Japan’s FES certification requirements, which added significant cost—approximately three times more expensive.

While the client didn’t specifically request Japanese certification, we wanted to avoid any issues with customs or mall inspectors. Ensuring compliance preemptively saved us potential headaches.

Even the connectors at the bottom of the counters were designed to allow for flexible cable routing from three sides. The power sockets we used were the standard two-prong type used in Japan. We also paid extra attention to the internal paint finish, making sure it was as polished as the exterior. Such meticulous attention to detail is rare.

The LED strips, angles, and color temperatures were all tested extensively. Based on a prototype, we made multiple adjustments, refining the angles and the text. We put a lot of effort into perfecting the display cases.

The client was very satisfied. After a thorough video inspection, they promptly paid the final installment, and we dispatched one of our colleagues to oversee the shipment.

Our clients are typically very straightforward and decisive, mostly because they are financially well-off. Display cases are relatively small projects for them, and as long as our quality meets their standards, payment is swift. I am grateful to our entire factory for working together to improve the quality of our products, and I’m thankful to our clients for their trust in me, Zhang Ya’ni.

If you’re unsatisfied with your current display cases, give XinFeng Factory a try.

我是展柜大小姐章娅妮，来自东莞鑫峰展柜厂，30年来我们厂只做类似于卡地亚珠宝这样的奢侈品展柜和道具。

100多个国内外品牌授权我们厂制作展柜和道具，虽然我们贵一点，但是品质堪比卡地亚。

既能做钟表、珠宝、博物馆等展柜，又能做陈列道具的工厂，这样的工厂，在国内没有第二家。

我已经用自己的姓名“章娅妮”注册了展柜品牌，这代表了我此生不转行。

做了不称心的展柜，应该来鑫峰厂试试。

手机/微信：17688026138

联系人：章娅妮

地址：中国广东省东莞市企石镇永发工业区环企大道42号之一

I am Ms. Zhang Yani, from Dongguan Xinfeng Showcase Factory. For 30 years, our factory has only made luxury showcase and props similar to Cartier jewelry.

More than 100 domestic and foreign brands authorize our factory to make display cases and props, although we are a little more expensive, but the quality is comparable to Cartier.

Both can do watches, jewelry, museums and other display cases, but also can do display props factory, such a factory, there is no second in the country.

I have registered the showcase brand with my own name "Zhang Yani", which means that I will not change my career in this life.

Do not satisfactory display case, should come to Xinfeng factory to try.

Tel/wechat: 17688026138

Contact: Zhang Yani

Add: No. 42 Huanqi Road, Yongfa Industrial Zone, Qishi Town, Dongguan City, Guangdong Province，China.