随着原木风、新中式的兴起，做展柜的客户也越来越多流行做木纹了，当然做陈列道具使用木纹的频率也高。

为了展柜造型的美观，我们展柜工厂也在积极研发各种能做木纹的工艺，怎么能在异形展柜上做出各种木纹，有高端的展柜，也有一般造价的展柜。

10多年前，比较常用的是贴木纹纸，木纹纸有各式各样的，价格便宜，毕竟是纸张，但是有一个缺点，纸张的纹路显假，不真实，再做上厚厚的油漆，做出来一看就像个假瓷器，不真实。

后来渐渐改进，工厂把木纹纸给彻底淘汰了，开始用木皮，木皮可有学问了。

木皮就是以原木为材料，将其切割成0.1mm~1mm的木皮，经过浸泡、烘干、以及特殊工艺加制而成，然后铺贴在展柜等表面上。实木贴皮通常分为两种：厚皮和薄皮。厚皮木纹立体效果强、质感好；薄皮较为透明且容易磨损 优点：实木贴皮可以做成各种各样烤漆和木饰面，适合的风格也多种多样。

原材料价格比木纹纸翻了十几倍，而且我也是在摸索中发现木皮有那么多窍门。有厚度的区分，0.3mm适合中低端家具，0.6mm耐磨耐用适合中高端家具，0.9mm最坚固适合高档家具。选择木皮时要考虑基材质量、制作工艺等因素。

0.3mm：这种厚度的木皮较薄，适合制作一些外观要求不高的中低端家具，如书桌、餐桌等。由于厚度较薄，其耐磨性和耐用性相对较弱，但成本较低。

0.6mm：相比于0.3mm的木皮，0.6mm的木皮更加耐磨，且不易变形和开裂。因此，它更适合制作一些外观和品质要求较高的家具，如衣柜、酒柜等。这种厚度的木皮在保证美观性的同时，也提升了家具的耐用性。

0.9mm：这种厚度的木皮相对于前两种来说更加坚固和耐用，适合制作一些高档家具，如实木美式家具、欧式家具等。它不仅具有优异的耐磨性和耐用性，还能更好地展现出实木的质感和纹理。

说明中的家具可代替成展柜，同意思理解。之前我还不知道，原来木皮市场“减料”现象这么严重！一样的价格买，但是木皮的厚度却越来越薄，木皮一薄，我们贴皮师傅一贴容易破，后期的养护也起不到作用，容易破边。

在发现这种情况后，每一次的木皮送到，都要检测过厚度，我告诉供应商，你可以加钱，但不能对我的材料动手脚。

下一章，再讲讲实木的展柜。

做了不称心的展柜，应该来鑫峰厂试试。

As the popularity of rustic and contemporary Chinese design trends increases, so does the demand for wood grain finishes on display cases and fixtures. Our exhibition cabinet factory has been diligently researching methods to apply wood grain textures on unconventional shapes, accommodating both high-end and budget-friendly projects.

A decade ago, wood grain paper was widely used for its variety and affordability. However, its artificial appearance, especially when covered with thick layers of paint, resulted in an unconvincing look, often likened to fake ceramics.

Improvements were eventually made, leading to the complete replacement of wood grain paper with veneer. Veneer, sliced from solid wood into thin layers ranging from 0.1mm to 1mm, undergoes processes such as soaking, drying, and specialized treatments before being applied to surfaces. There are two main categories of solid wood veneer: thick and thin. Thick veneer offers a pronounced three-dimensional effect and excellent texture, whereas thin veneer is more transparent and susceptible to wear.

The cost of raw materials for veneer is several times higher than that of wood grain paper. Through practical exploration, I have learned about the nuances of working with veneer, including different thicknesses. A thickness of 0.3mm is suitable for mid-to-low-end products; 0.6mm is more durable and less likely to deform or crack, fitting for mid-to-high-end applications; and 0.9mm is the sturdiest, best suited for high-end pieces. Choosing veneer involves considering aspects such as substrate quality and craftsmanship.

When translating the mentioned furniture into display cabinets, the implications remain consistent. Previously, I was unaware of the severe "material reduction" phenomenon in the veneer market—buying veneer at the same price but receiving increasingly thinner materials. Thinner veneer is prone to tearing during application and demands more maintenance, resulting in poor edge integrity.

After identifying this issue, we now check each delivery of veneer for proper thickness. We inform suppliers that they can raise their prices but must not tamper with our material quality.

Next, we will delve into solid wood display cabinets.

For unsatisfactory display cabinets, consider trying Xinfeng Factory.

我是展柜大小姐章娅妮，来自东莞鑫峰展柜厂，30年来我们厂只做类似于卡地亚珠宝这样的奢侈品展柜和道具。

100多个国内外品牌授权我们厂制作展柜和道具，虽然我们贵一点，但是品质堪比卡地亚。

既能做钟表、珠宝、博物馆等展柜，又能做陈列道具的工厂，这样的工厂，在国内没有第二家。

我已经用自己的姓名“章娅妮”注册了展柜品牌，这代表了我此生不转行。

做了不称心的展柜，应该来鑫峰厂试试。

手机/微信：17688026138

联系人：章娅妮

地址：中国广东省东莞市企石镇永发工业区环企大道42号之一

I am Ms. Zhang Yani, from Dongguan Xinfeng Showcase Factory. For 30 years, our factory has only made luxury showcase and props similar to Cartier jewelry.

More than 100 domestic and foreign brands authorize our factory to make display cases and props, although we are a little more expensive, but the quality is comparable to Cartier.

Both can do watches, jewelry, museums and other display cases, but also can do display props factory, such a factory, there is no second in the country.

I have registered the showcase brand with my own name "Zhang Yani", which means that I will not change my career in this life.

Do not satisfactory display case, should come to Xinfeng factory to try.

Tel/wechat: 17688026138

Contact: Zhang Yani

Add: No. 42 Huanqi Road, Yongfa Industrial Zone, Qishi Town, Dongguan City, Guangdong Province，China